.png&w=256&q=75)
.png&w=256&q=75)
.png&w=256&q=75)
Wall Mounted Controller Holder - Print in Place Folding Bracket
2K downloads · 2 years ago · [Instructions](https://prinnit.com/ForgeCore/design/3681d4rGW3HwmFiN3FRl8gM0j1y?tab=instructions&hig
Instructions Hardware Filaments
Wall Mounted Controller Holder - Intermediate
This Wall Mounted Controller Holder is print in place. Screw the rails into the wall and slide the holder overtop of it! Perfect for saving space on your desk and displaying your controllers.
Wall Mounted Controller Holder - Print in Place Folding Bracket
2K downloads · 2 years ago in  andÂ
PlayBook'd - Go
Telephones Booth
Spinny Succulents - Pack III
Desktop Golf Gen 2
PlayBook'd - Playing Cards
Desktop Dumpster
PlayBook'd Cribbage
PlayBook'd Crosswords
Snack Attack - Gen 2
PlayBook'd Snakes and Ladders
.png&w=3840&q=75)
Date Night Daisy
PlayBook'd Settlers' Storage
Scoopy Stacks
Butterfly Fridge Magnets - Pack II
Playbook'd - Checkers
PlayBook'd - Shut the Box
PlayBook'd - Hook and Ring.3mf
Paint Can Drying Rack
Mossy Mounds
Hi, we removed the stl files but we have the 3mf there for you. you can export the stl from the 3mf if needed for any reason.
I tried printing IT, and same problem
same here. the easy print files have them on but not the tri sets
Hey it's pretty awful that you removed an integral part of the assembly from the stl without mentioning ANYWHERE except in the comments here. That is NOT acting in goods faith. Supremely disappointed having wasted 7 hours and loads of filament. You absolutely NEED to tell people that. 0/10. what the hell man? who does that?
Yeah that's unacceptable. And super frustrating. I'm really sorry that happened. After digging, it look like Thangs website apparently reverted the changes I made to the model. This is an issue they're aware, but i will be yelling at them again.
Please email me ForgeCoreCo@gmail.com so I can sort this out for you
Are the front holders large enough to put the whole switch there?
You may be able to fit it but We haven't tested that specifically.
can you please fix the middle part on the stl files. it seems to be missing.
Hi we removed the stl but you can use the 3mf and export the stl from the 3mf if needed for any reason.
Hi, can you please look at this model and add that little supporting leg? Just patr missing
HI, Sorry about that, We will get the stl files fixed. The Easy Print 3mf file is correct and has all of my recommended settings. I would highly suggest using that file with Bambu Studio.
okay thanks, that worked
Where is the middle part that slots to the hinge and three lines the stl file? The 3mf has it but not the stl files
Hi, Are you referring to the rails? The stl files, for them, should be there when you download the file. it is just titled rails.
Hi, no I have those, the STL named Controller mounts ( with joycon slots) the middle of the design, the middle latch that lets you adjust the height of the controllers, it is only on the full project file, not the individual stl. could I get the stl for the lock in hinge part
The print always fails for me right on top of the support. using bambu studio. any tips on fixing this ?
Hi there, are you having issues on the one with joycon slots or no slots? Also, if you have more details on how exactly its failing, that could help me narrow down ideas.
i tried both models and am getting the same issue. right on top of the support the print turns to spaghetti, like the upside down poitn wont adhere to the top of the support. I dont know if im explaining it properly.
Hi there! I appreciate your patience. I updated the geometry of the dove tail to allow it to print much better. There is a new 3mf as well as stl files. Let me know how it prints for you!!
alright i will give it a spin and update you thanks !
I understand. Let me look into this and I will get back to you asap.
Can you please upload 3mf for print settings? Im not able to get supports correctly
Hi there, I'm sorry for the delay! I added a 3mf file with painted on supports. I hope that helps.